CATEGORY
2脳STM-16 Optical Interface Board(S-16.1,LC)
Apply to Huawei OSN 3500, OSN 7500 equipment to transmit and receive 2脳STM-16 optical signals, at transit 2~15km.
Supports the detection and query of the information about the optical module.
Support the ALS function. The optical interface supports the setting of the on/off state of a laser.
Supports the usage and detection of the SFP optical module.
Supports the VC-12, VC-3, VC-4 services and VC-4-4c, VC-4-8c, VC-4-16c concatenation services.
Supports the transparent transmission and termination of the path overheads.
Supports the setting and query of the J0, J1, J2, and C2 bytes.
Supports one or two channels of ECC communication.
Supports the time synchronization feature and transmission of the time information by using the section overhead bytes.
Supports the Two-fiber ring MSP, Four-fiber ring MSP, Linear MSP, SNCP, SNCMP, SNCTP.
Supports the fiber-shared virtual trail protection.
Supports the fiber-shared MSP and processes four sets of K bytes
Supports a maximum of four MSP rings.
Supports inloops and outloops at optical interfaces.
Supports inloops and outloops on VC-4 paths.
Supports warm resets and cold resets. The warm reset does not affect services.
Supports the query of the manufacturing information of the board.
Supports the in-service loading of the FPGA.
Supports the upgrade of the board software without affecting services.
Supports the press-to-collect function in fault data collection.
SSN1SLD16 is a 2-ports STM-16 optical interface board, can be used on Huawei OSN3500, OSN7500. SSN1SLD16(S-16.1,LC) part number is 03030FVH, model name is SSN1SLD1602.SSN1SLD16(S-16.1,LC) comes with 2 unit S-16.1 SFP module, transmission distance is 15km. SFP module is swappable to perform different transmission distance.
| Front Panel | ||
The number code that follows the board name in the bar code is the feature code of the board. The feature code of the SSN1SLD16(S-16.1,LC) indicates the type of optical interface.
| ||
| Valid slot | ||
| OSN 3500: When the cross-connect boards are IXCS and SXCA: the SSN1SLD16(S-16.1,LC) can be installed in slots 7,8,11,12. | ||
| Feature Code | ||
| The feature code of the SSN1SLD16(S-16.1,LC) indicates the type of optical interface. | ||
| Board | Feature Code | Type of Optical Interface |
| SSN1SLD1602 | 02 | S-16.1 |
| Optical interface parameters | ||
| Parameter | Value | |
| Nominal bit rate | 2488320 kbit/s | |
| Line code pattern | NRZ | |
| Application code | S-16.1 | |
| Transmission distance (km) | 2 to 15 | |
| Type of fiber | Single-mode LC | |
| Operating wavelength range (nm) | 1260 to 1360 | |
| Launched optical power range (dBm) | -5 to 0 | |
| Receiver sensitivity (dBm) | -18 | |
| Minimum overload (dBm) | 0 | |
| Maximum -20 dB spectral width (nm) | 1 | |
| Minimum extinction ratio (dB) | 8.2 | |
| Minimum side mode suppression ratio (dB) | 30 | |
| Mechanical Specifications | ||
| Dimensions (mm) | 25.4 (W) x 235.2 (D) x 261.4 (H) | |
| Weight (kg) | 0.9 | |
